DHT-160 China fornecedor de alta qualidade transportador de correia fabricante
Informação básica
Modelo: DHT-160
Descrição do produto
name | belt conveyor | |
Model | DHT-160 | |
Feature | Nylon conveyor belt | |
Fabric type | NN400 | |
Standard | GB/T7984-2001 | |
Tensile Strength(Mpa) | 15-24 | |
Conveyor belt width | 200-2000 | |
Features and application: Compare with cotton conveyor belts,nylon conveyor belts has a advantages of high strength,good flexibility,impact resistant,light weight,good groove. It can effectively reduce the transmission costs,achieve high-speed,big span,long-distance transportation.
|
Conveyor belt length | As your request |
Product Technolgy Specification | ||||||
Belt type | Fabric type | Single fabric strength(N/mm) | Single fabric thickness(N/mm) |
the thickness of overburden(mm) Top rubber/ Bottom rubber |
Ply | Width Range(mm) |
EP belt | EP100 | 100 | 0.75 |
3.8-8.0/ 1.5-4.5 |
2-10 | 200-2000 |
EP150 | 150 | 0.85 | 2-10 | |||
EP200 | 200 | 1.00 | 2-8 | |||
EP250 | 250 | 1.20 | 2-8 | |||
EP300 | 300 | 1.35 | 2-6 | |||
EP400 | 400 | 1.65 | 2-6 | |||
Nylon belt | NN100 | 100 | 0.70 | 2-10 | ||
NN150 | 150 | 0.75 | 2-10 | |||
NN200 | 200 | 0.90 | 2-8 | |||
NN250 | 250 | 1.15 | 2-8 | |||
NN300 | 300 | 1.25 | 2-6 | |||
NN400 | 400 | 1.50 | 2-6 | |||
Note:The thickness of overburden,ply,width of belts and length of belt can customized as customers' request |
Physical Properties of the coating layer(before aging) | |||
Performance type | Tensile strength/Mpa ≥ | Elongation at break/% ≥ | Abrasion loss/mm³ ≤ |
H | 24 | 450 | 120 |
D | 18 | 400 | 100 |
L | 15 | 350 | 200 |
Note:H is used for transporting on the tape is strongly impair the sharp wear material;D is used for conveying high abrasive material;L is used for conveying moderate wear material.
70°x168h after aging the rate of change about Tensile strength and Elongation at break is ±25%. |
Synthetic fiber skeleton belt minimum adhesive strength | |||
Index item | among the cloth layer | among overburden and cloth layer | |
the thickness of overburden 0.8mm~1.5mm | the thickness of overburden >1.5mm | ||
Average value of all samples N/mm ≥ | 4.5 | 3.2 | 3.5 |
Minimum peak value of all samples N/mm ≥ | 3.9 | 2.4 | 2.9 |
Note:the highest peak of all samples should not exceed 20N/mm. |
Grupo de Produto : Correia transportadora de borracha > Correias transportadoras NN / EP
Premium Related Products