Correia de transmissão de borracha da parede lateral corrugada DHT-163 for sale
Informação básica
Modelo: DHT-163
Descrição do produto
name | sidewall rubber belts | |
Model | DHT-163 | |
Standard | HG/T 4062-2008 | |
Features and application: The sidewall conveyor belts consist of base belt,sidewall and cleats.It increase the conveying angle(30 to 90 degrees).
It has the advantages of small installation space,less investment,large conveying capacity,greater lifting height.It can achieve a smooth transition from the horizontal to vertical.
It is suitable for conveying easily scattered powdery,granular and small block shape materials.
|
Conveyor belt length | As your request |
Product Technolgy Specification | ||||||
Belt type | Fabric type | Single fabric strength(N/mm) | Single fabric thickness(N/mm) |
the thickness of overburden(mm) Top rubber/ Bottom rubber |
Ply | Width Range(mm) |
EP belt | EP100 | 100 | 0.75 |
3.8-8.0/ 1.5-4.5 |
2-10 | 200-2000 |
EP150 | 150 | 0.85 | 2-10 | |||
EP200 | 200 | 1.00 | 2-8 | |||
EP250 | 250 | 1.20 | 2-8 | |||
EP300 | 300 | 1.35 | 2-6 | |||
EP400 | 400 | 1.65 | 2-6 | |||
Nylon belt | NN100 | 100 | 0.70 | 2-10 | ||
NN150 | 150 | 0.75 | 2-10 | |||
NN200 | 200 | 0.90 | 2-8 | |||
NN250 | 250 | 1.15 | 2-8 | |||
NN300 | 300 | 1.25 | 2-6 | |||
NN400 | 400 | 1.50 | 2-6 | |||
Note:The thickness of overburden,ply,width of belts and length of belt can customized as customers' request |
Physical Properties of the coating layer(before aging) | |||
Performance type | Tensile strength/Mpa ≥ | Elongation at break/% ≥ | Abrasion loss/mm³ ≤ |
H | 24 | 450 | 120 |
D | 18 | 400 | 100 |
L | 15 | 350 | 200 |
Note:H is used for transporting on the tape is strongly impair the sharp wear material;D is used for conveying high abrasive material;L is used for conveying moderate wear material.
70°x168h after aging the rate of change about Tensile strength and Elongation at break is ±25%. |
Synthetic fiber skeleton belt minimum adhesive strength | |||
Index item | among the cloth layer | among overburden and cloth layer | |
the thickness of overburden 0.8mm~1.5mm | the thickness of overburden >1.5mm | ||
Average value of all samples N/mm ≥ | 4.5 | 3.2 | 3.5 |
Minimum peak value of all samples N/mm ≥ | 3.9 | 2.4 | 2.9 |
Note:the highest peak of all samples should not exceed 20N/mm. |
Grupo de Produto : Correia transportadora de borracha > Correias transportadoras de parede lateral